AirWild MLP Servo Arms

This package comes complete with 10 servo arms for both the ailerons and elevators. The advantage of these 1.5” arms is it will deliver the strength and throw needed to perform those 3D maneuvers without bending or flexing.
Please specify JR or Futaba** or Hitec when ordering
**Futaba servos, will include 6 arms for the 9152 servos and 4-arms for the standard size elevator servos.

Hanger 9 Control Arms. 8/32”

Comes prepackage (2) per pack. 8/32” size

Hanger 9 Control Arms. 10/32”

Comes prepackage (2) per pack. 10/32” size

Wood Propeller 37x13 for 3W-275 engine

BH Series custom wood propeller designed specifically for the 3W-275 engine. This propeller is designed to be the quietest propeller with the best performance available! A lot of work in testing went into this design to get the best possible thrust for the 50% airplanes. The 37x13 prop is just what you need and a perfect match for the 60% Cubs and similar airplanes that don’t need a lot of top speed but better thrust.

BH Series 36x14 Semitar Propeller for 3W-275 engine

BH Series custom wood propeller designed specifically for the 3W-275. This new Semitar propeller is designed to be the quietest propeller with the best performance available for the aerobatic type airplanes like the Edge and Yaks that needs a little more top speed.  A lot of work in testing went into this design to get the best possible thrust and speed for the 3W-275 powered aerobatic airplanes.

Smart-Fly Package

Du-bro Hardware packages for 50% Edge / Extra / Yak / Ultimate

Here is your one stop shopping for all the Dubro products you need. Included in this kit is the fuel tank, wheels,axels, ball links, threaded rods, tygon fuel lines, wheel collars, washers, locknuts, engine bolts and more.Some of these products duplicate the hardware package in the kit but have higher quality. 19 different items! I have taken into consideration the duplicate hardware and have adjusted the price to cover the difference.

Du-bro Hardware packages for 150cc Yak/Cub/Hiperbipe

Here is your one stop shopping for all the Dubro products you need. Included in this kit is the fuel tank, wheels,axels, ball links, threaded rods, tygon fuel lines, wheel collars, washers, locknuts, engine bolts and more.Some of these products duplicate the hardware package in the kit but have higher quality. 19 different items! I have taken into consideration the duplicate hardware and have adjusted the price to cover the difference.

Du-bro Hardware packages for 100cc Yak/Cub/Hiperbipe

Here is your one stop shopping for all the Dubro products you need. Included in this kit is the fuel tank, wheels,axels, ball links, threaded rods, tygon fuel lines, wheel collars, washers, locknuts, engine bolts and more.Some of these products duplicate the hardware package in the kit but have higher quality. 19 different items! I have taken into consideration the duplicate hardware and have adjusted the price to cover the difference.

Du-bro Hardware packages for 50cc Yak/Cub

Here is your one stop shopping for all the Dubro products you need. Included in this kit is the fuel tank, wheels,axels, ball links, threaded rods, tygon fuel lines, wheel collars, washers, locknuts, engine bolts and more.Some of these products duplicate the hardware package in the kit but have higher quality. 19 different items! I have taken into consideration the duplicate hardware and have adjusted the price to cover the difference.

Carbon Spinner 5" for the 150cc Yak and 38% Decathlon

Order this 5” Carbon Spinner and save 3.6 ounces of weight over a Tru-Turn 5” spinner with light weight back plate.

Carbon Spinner 6" for the Ultimate and 275cc Yak.

Order this 6” Carbon Spinner and save 3.6 ounces of weight over a Tru-Turn 6” spinner with light weight back plate.

Carbon Spinner 7" for the 56% Decathlon

TME SmartSmoker Smoke System

Get your smoke system all ready for installation. This package comes complete with everything you need to have for smoke on your new 50% Edge 540 ARF.

TME’s SmartSmoker includes:

The pump, 4ft of tygon and 4" of neoprene, a check valve, and a “T” valve plus a 40 ounce DuBro tank and a 2-cell 7.4 volt 2400mah Lithium Battery from Fromeco.

Fromeco's Flight Package

2-5400mAh Lithium Ion packs. These batteries come pre-wired for the Smart-Fly package. It includes 16Awg wires with Dean’s connector and a JR lead for charging.2-2600mAh Lithium-ion packs for ignition. These batteries come complete with a JR lead and HD wire. You need two ignition batteries to take advantage of the redundancy of the twin spark engine.

Air-Filter for 3W-275

this air-filter is a ‘must have’ item to reduce the amount of fuel that gets inside your motor box due the rear induction carburetor. It will also help to reduce noise and lower your overall DB levels of your engine. This unit bolts directly onto your carburetor in minutes

Bungee Covers. One size fits all.

These hand sewn bungee covers come ready to install on your model. These are made from high quality cloth and have elastic sewn into each end. Velcro is also sewn length wise for easy installation or removal from landing gear.

Carbon Tail Wheel

While there is nothing wrong with the standard tail wheel in the 50% Edge 540 kit, this carbon tail wheel will not require you to straighten the wire after a hard landing. Made from multiple layers of carbon, this tail wheel assembly will last through the hardest of harrier landings!

Tru-Turn “Skull-Cap” 60%  3.0” diameter
Engine: 3W-275cc        

You know the high quality of Tru-Turn Spinners, now you can have that high quality product for your J-3 Cub. The Tru-Turn Skull Cap spinner is just what you need to finish off that scale appearance. This Skull Cap has been designed specifically for the BH Design Cubs and is weighted to assist in balancing your airplane.

Tru-Turn “Skull-Cap” 50%  3.0” diameter
Engines: 200-210cc

You know the high quality of Tru-Turn Spinners, now you can have that high quality product for your J-3 Cub. The Tru-Turn Skull Cap spinner is just what you need to finish off that scale appearance. This Skull Cap has been designed specifically for the BH Design Cubs and is weighted to assist in balancing your airplane.

Tru-Turn “Skull-Cap” 50%  2.5” diameter 
Engines: 150-170cc

You know the high quality of Tru-Turn Spinners, now you can have that high quality product for your J-3 Cub. The Tru-Turn Skull Cap spinner is just what you need to finish off that scale appearance. This Skull Cap has been designed specifically for the BH Design Cubs and is weighted to assist in balancing your airplane.

Custom Headers

Custom Pefa headers made specifically for the 50% Yak 55M, 50% Edge 540, 57% Decathlon, Ulitmate 20-300. We have your custom headers for all 3W-275 applications.

50% Custom Helmet Heads